Oral-B 6000 Specifications Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 85
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
7
Specifications
Noise level:
65 dB (A)
Connecting and charging
Your toothbrush has a waterproof handle, is
electrically safe and designed for use in the
bathroom.
Plug the charger into an electrical outlet. For
voltage specifications refer to the bottom of the
charging unit.
The flashing green lights indicate that the tooth-
brush is charging (picture 1, page 5); once it is
fully charged, the lights turn off. A full charge can
take up to 24 hours and enables up to 10 days of
regular brushing (twice a day, 2 minutes).
Note: After deep discharge, the green lights
might not flash immediately; it can take up to
10–15 minutes.
If the rechargeable battery is low the red low
charge indicator light is flashing for some seconds
when turning your toothbrush on/off. If the
rechargeable battery is empty the motor will stop;
it will need a 40-minute charge before you can
use it for a 2-minute brushing.
For everyday use, the handle can be stored on
the charging unit to maintain it at full power.
Overcharging is impossible.
Battery maintenance: To maintain the maximum
capacity of the rechargeable battery, unplug the
charging unit and fully discharge the handle with
regular use at least every 6 months.
SmartGuide adjustments
The SmartGuide (i) comes with a demonstration
mode. Deactivate this mode by removing the
compartment cover in the back (picture A, page 4)
and push the «set» or «h/min» button. A flashing
«12:00» indicates that you can now adjust the clock
time.
Note: If the SmartGuide display is blank before first
use (no active demonstration mode / no batteries
inserted) the batteries will need to be replaced/
inserted before continuing. Batteries are supplied.
Clock Time
Press and hold the «set» button until «12h» is
displayed. By briefly pressing the «h/min» button,
you can toggle between «12h» or «24h» daytime
format. Push «set» to confirm your choice. Then
the hour digit starts flashing. Press the «h/min»
button until the right hour appears and confirm with
«set». Proceed same way to set both minute digits
(picture B, page 4).
SmartGuide Icons
Displayed
Icon
Meaning
«Daily Clean» mode
«Deep Clean» mode
«Sensitive» mode
«Whitening» mode
«Massage» mode
Too much pressure is applied.
Reduce the brushing force.
«Quadrant circle»
Move to the next quadrant of your
mouth when the relevant segment
flashes.
You reached the dentist recom-
mended 2-minute brushing time
(3-minute brushing time within the
Deep Clean mode).
After use you will receive a star with
each completed quadrant.
SmartGuide batteries are low.
Change batteries of the SmartGuide.
Using your toothbrush
Brushing technique
Wet brush head and apply any kind of toothpaste.
To avoid splashing, guide the brush head to your
teeth before switching on the appliance (picture 2,
page 5). When brushing your teeth with one of the
rotating brush heads guide the brush head slowly
from tooth to tooth, spending a few seconds on
each tooth surface (picture 3, page 5).
When using the TriZone brush head place the tooth-
brush bristles against the teeth at a slight angle
towards the gumline. Apply light pressure and start
brushing in back and forth motions, just like you
would do with a manual toothbrush.
96499341_D34_CEE_S6-88.indd 7 12.12.13 11:49
CSS APPROVED Effective Date 19Dec2013 GMT - Printed 22May2014 Page 7 of 88
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 84 85

Comments to this Manuals

No comments